Skip Ribbon Commands
Skip to main content
Dassault’s Falcon 5X Enters Ground Test Phase
Engine run-up expected before year’s end; first flight in second quarter 2015.

October 20, 2014 (Orlando, Florida): Dassault’s brand new Falcon 5X has entered the ground testing phase following power up of the first aircraft at the end of August.  First flight is expected by the second quarter of next year and certification by the end of 2016.

The fuselage for the first aircraft arrived at Dassault’s main assembly plant in Mérignac, near Bordeaux, in June and received its wings, new Snecma Silvercrest engines and onboard systems during the summer. The initial ground tests covered electrical and fuel system, hydraulics, and testing of the Falcon 5X’s advanced digital flight controls. All tests went as expected. Ground vibration testing will start later this month.

“We are extremely pleased with the way the program is advancing, and are fully on schedule for a second quarter 2015 first flight,” said Olivier Villa, Senior Vice President, Civil Aircraft, Dassault Aviation. “Wing mating and other operations were completed in a single step without need for rework, using our latest Product Lifecycle Management digital modeling methods. Development has also benefited from the use of our new FalconScan tool, developed for onboard fault diagnosis, which we have employed to facilitate ground testing.”

Assembly teams are currently installing final onboard test equipment on aircraft number one in anticipation of an initial engine run-up by year end and the commencement of taxi tests shortly thereafter. Final fuselage outfitting of aircraft number two is set to begin in November and work on the subsequent units will follow at one aircraft per month.

Snecma Silvercrest engine testing progressing
The development program for the new Silvercrest high-bypass engine is proceeding as planned, with eight power plants involved in the engine test and certification campaign. The engine has accumulated 1,300 hours on the bench to date. SNECMA commenced the engine flight test campaign in June using a dedicated flying test bed. “The engines have demonstrated nominal and max take-off thrust levels and shown very satisfactory operability and dynamic behavior,” said Olivier Villa.

Airframe and systems testing underway
Meanwhile, Dassault engineers are proceeding with avionics and flight control testing on the integration test benches at Dassault Aviation flight test center in Istres and on the global simulation bench at Dassault Aviation headquarters in Saint-Cloud. This test bench replicates the Flight Control System and the Hydraulic System.

Preparations are also underway for Falcon 5X airframe static and fatigue testing. The fatigue test article was delivered to DGA-Ta (former CEAT) in Toulouse, France earlier this month and testing is due to begin in January.

In addition to the standard qualification tests, aircraft equipment will be subjected to a pair of efficient endurance testing methods - the Highly Accelerated Life Test (HALT) and Highly Accelerated Stress Screening (HASS). These additional tests are part of a comprehensive effort to ensure that the 5X is fully mature by delivery of the first aircraft. The testing will expose equipment and systems to extremes of vibration, humidity, temperature, pressure and other in-flight phenomena exceeding those that the aircraft will be subjected to in service.

The Falcon 5X benefits from production improvements such as Product Lifecycle Management (PLM) software that permits the aircraft to be designed, built and supported using a single set of computer modeling data that is shared by Dassault and all suppliers and subcontractors involved in the project. The program uses the latest iteration of PLM, Version 6, which extends PLM functionalities to the system level, streamlining and accelerating the design and testing process.

Note for the Editors

Dassault Falcon is the recognized global brand for Dassault business jets which are designed, manufactured and supported by Dassault Aviation and Dassault Falcon Jet Corp.

About Dassault Aviation

Dassault Aviation is a leading aerospace company with a presence in over 90 countries across five continents. It produces the Rafale fighter jet as well as the complete line of Falcons. The company employs a workforce of over 11,000 and has assembly and production plants in both France and the United States and service facilities around the globe. Since the rollout of the first Falcon 20 in 1963, over 2,500 Falcon jets have been delivered. Dassault offers a range of six business jets from the twin-engine 3,350 nm large-cabin Falcon 2000S to its new flagship, the tri-engine 6,450 nm ultra-long range Falcon 8X.

About Dassault Falcon Jet

Dassault Falcon Jet Corp., is a wholly owned U.S. subsidiary of Dassault Aviation, France. Dassault Falcon Jet markets and supports the Falcon family of business jets throughout North America and South America.

Back to previous page